CodeLobster IDE http://codelobster.com/forum/ |
|
Configuring remote xdebug 3 http://codelobster.com/forum/viewtopic.php?f=8&t=25090 |
Page 1 of 1 |
Author: | izzysteve [ Sun Feb 27, 2022 9:44 am ] | |||
Post subject: | Configuring remote xdebug 3 | |||
Hi, I am having trouble configuring xdebug 3 for use on a remote site with Codelobster IDE When I click 'Check Xdebug settings' I get message 'web server not found'. My config on server can be viewed at https://illuceo.net/xdebuginfo.php I have attached a screenshot of config of CL IDE and also the 99-xdebug.ini file. Must confess, a bit out of my depth here, so any help appreciated. Thanks - Steve
|
Author: | Admin [ Mon Feb 28, 2022 7:20 am ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi. We can't open this link: https://illuceo.net/xdebuginfo.php Could You, please, attach this file into the topic. Thanks, Codelobster Team. |
Author: | Guest [ Mon Feb 28, 2022 9:17 am ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi, Sorry, had problem at host. The link should work now. Thanks, Steve |
Author: | Admin [ Mon Feb 28, 2022 1:44 pm ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi. 1. Xdebug must be installed on the same remote host (213.175.201.126) You don't need it on your local PC. Config file on 213.175.201.126 should include something like: xdebug.remote_host = 127.0.0.1 2. If your remote host is located on local networt, then it should be accessable on 9003 port otherwise You should apply port forwarding by something like: ssh -R 9003:localhost:9003 username@213.175.201.126 -p 22 Regards, Codelobster Team. |
Author: | izzysteve [ Mon Feb 28, 2022 2:34 pm ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi, xdebug is installed on remote host at (213.175.201.126), also aka https://host.illuceo.net. It is not installed on local PC. I have changed the configuration in 99-xdebug.ini to show xdebug.remote_host = 127.0.0.1 as advised, and have confirmed this on https://illuceo.net/xdebuginfo.php The web server is still not found. I have one dumb question though. With regard port 9003 are you talking about my local pc, or the remote server? Apologies for not understanding. Thanks, Steve |
Author: | izzysteve [ Fri Mar 11, 2022 9:08 am ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi Can you offer any advice on configuring Port 9003? Thanks, Steve |
Author: | Admin [ Tue Mar 15, 2022 3:05 pm ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi. 1) Your php.ini file should include the following lines (but with your paths, and don't forget to restart your web server): [xdebug] zend_extension = "C:\xampp_8\php\ext\php_xdebug-3.0.1-8.0-vs16-x86_64.dll"; xdebug.remote_enable = on; xdebug.default_enable = on; xdebug.remote_host = localhost; 127.0.0.1 for some configuration xdebug.client_port = 9003; xdebug.max_nesting_level = 256; required for some frameworks xdebug.remote_handler = "dbgp"; xdebug.remote_autostart = 1; xdebug.mode=develop,debug,trace,profile; 2) Please, send us the output of the following PHP script (if it doesn't work still): Code: <?php print(phpinfo (INFO_ALL)); ?> Thanks, Codelobster Team. |
Author: | izzysteve [ Tue Mar 15, 2022 6:09 pm ] |
Post subject: | Re: Configuring remote xdebug 3 |
Hi, I have changed the settings you suggest but Codelobster still shows message 'Web server not found'. You can see the output you requested at https://illuceo.net/phpinfo.php In Codelobster, my settings are: Start URL - https://illuceo.net Port 9003 IDE Key CLOBSTER (left as it appeared) xDebug Autostart is checked On my CENTOS server I used the WHM tool CSF to add port 9003 to the TCP_IN and TCP_OUT lists. Not sure if I should have done this Thanks, Steve |
Page 1 of 1 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |